FAQ
Use this text to share information about your product or shipping policies.
How do I fold R1 & R1 PRO MAX?
We first need to loosen the blue round button on the rod first, and use one hand pull the blue strip lock, with the other hand to make sure the pole will be folded down.
How can I do if Scooter became loose after long time riding?
You need to push the rod to the straightest position, and then tighten the blue round button until the rod won't sway or loose.
How do I remove Scooter Battery?
The battery can be removed by pressing down the blue button above the battery and pulling it out at the same time.
How do I install Battery?
You need to tilt the end of the battery into the slot first, and then put the whole battery in, after hearing the "snap" sound, indicating that the battery is placed OK.
How do I charge my Scooter?
You can choose to charge it with the regular charger that comes with the electric scooter, or you can choose to charge it with LIRPE's solar panel.
How do I store the e-scooter and its battery?
1. Fully charge the e-scooter before storage. Check the battery monthly, and recharge it if necessary to keep it 70%-75% charged.
2. Do not charge if the temperature is below 50°F (10°C).
3.Keep the e-scooter in a dry and ventilated area away from direct sunlight exposure, and cover the e-scooter to protect against dust.
How do I change the riding mode?
After the boot, press the switch key to switch speed, there are economic speed, regular speed and high-speed mode can be selected.
How do I install the handlebars?
The design of our two handlebars is similar as turning screws, according to the "L" and "R" marks indicated on the handlebars, select the corresponding handlebars and tighten them.
How do I charge the E-Scooter with LIRPE Solar Panel?
First we need to spread the solar panel, preferably at some angle in full sunlight. The charging port of the solar panel has several choices, of which the DC connector is the same as the charging port of the LIRPE scooter battery, using the self-contained cable of solar panel to connect the two ports to charge. The battery can be charged on the scooter, or can be taken off to be charged directly.
Can I use LIRPE Solar Panel for other Scooters and E-bike charging?
It's ok to use, but must confirm the charging input power of battery from other scooters and electric bicycles is matching with our Lirpe Solar Panel, whose power is 36V, 100W.
Can I use my Scooter in a rainy day or snow?
We do not recommend to use it in a rainy day or snow even we use some waterproof material to prevent daily splash. But to keep you and your Scooter safe we recommend to use it in Sunny day.
What will effect the e-scooter range?
The actual range depends on a variety of factors such as battery status, tire pressure, load, temperature, wind speed, rider weight, road conditions,and riding habits.
Can this overcharge if stayed pugged in overnight?
We don't recommend to charge it overnight.